Instructions for getting the most fun from your new Yomega Yoyo.

Adjusting the string

To achieve the proper string length, set the toy on the floor with the string fully extended. If necessary, cut the string 3 inches above your navel, and reform the knotted loop so that the length of the string is waist high when the toy is touching the floor. (FIG.1)


Making a slip knot

Make a slip knot by pushing the string through the loop. You now have an adjustable loop through which to place the middle finger of your throwing hand. (FIG.2)

 

Replacing the String

Alpha Wing, Raider®, Xodus II, Magnetar, Maverick® and all Yomega roller bearing models require the Single Loop Method. Simply remove old string and replace.
Brain®, Power Brain XP®, Fireball® and Spectrum® require the Double Loop Method. (FIG.3)

Lubrication of Yomega Yoyos

Yomega yoyo’s are lubricated at the factory. However, after repeated use, additional lubrication may be necessary. Periodic lubrication using Yomega Lube, mineral or baby oil, improves performance and responsive return capability.

Brain®, Power Brain XP®, Fireball® and Spectrum®  and all Transaxle Models – Unscrew the two yoyo halves and remove the plastic “transaxle” and place a small drop of Yomega lube or oil on the metal axle. Then re-assemble the yoyo. (FIG.4)

Raider®, Magnetar™, Maverick® and all Bearing Models –

Unscrew the halves revealing the bearing. Place a small drop of lube oil at the axle near the bearing. Then re-assemble the yoyo. (FIG.5)

Remember – Except for the Alpha Wing, all Yomega models are modular. They can be unscrewed to remove string knots and lubricate. Re-assemble the 2 halves by screwing them back together snugly. Do not overtighten.  Overtightening will cause damage to the yoyo.

Strangulation Warning 0-3 Years

Not suitable for children under 36 months due to small part and long cord that may present choking and strangulation.

 

Battery Cell Warning

This product contains a Button or Coin cell Battery. A swallowed Button or Coin cell Battery can cause internal chemical burnes in as little as two hours and lead to death. Dispose of used batteries immediately. Keep new and used batteries away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention

To Change the Batteries (Spectrum)

Use a small screwdriver to remove the cover, remove the old batteries and insert 4xAG10 batteries, ensuring the correct polarity is used.

  • Replacement batteries are style AG10 –
  • use only this style of replacement batteries.

PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE.

BATTERY INFORMATION:

Non-rechargeable batteries are not to be recharged.

Rechargeable batteries are to be removed from the toy before being charged.

Batteries are to be inserted with the correct polarity. Exhausted batteries are to be removed from the toy.

The supply terminals are not to be short-circuited.

ALWAYS:

Make sure battery compartments are secure.

Use batteries of correct size and type.

Fit batteries of the correct observing the plus and minus marks on the battery and compartment. 

Replace a whole set of batteries at one time.

Remove dead batteries from equipment.

Remove batteries from appliance that will not be used again for a long time.

Please remember that small button cells and all batteries should be kept away from young children as they could be easily swallowed, seek medical advice if you believe a cell has been swallowed.

NEVER:

Mix different types of batteries.

Mix old and new batteries.

Dispose of batteries in a fire.

Attempt to recharge ordinary batteries.

Spectrum EX Electrical Components

  1. Push button X2
  2. RGB LED X4
  3. Vibration switch X4
  4. LR1130 (65MAH) Battery X4
 
FUNCTION DESCRIPTION

To activate the lights, push the button.
The first lighting effect will be multi-colored. Push the button again to change to white. Continue pushing the button to cycle through all the colors listed below. Once all colors have been cycled through, it will return to the multi-colored. (left and the right body has separate control).
When vibration switch has no action for over 30 seconds, system will enter sleep mode.
When vibration is detected again, the system will engage immediately with last lighting color setting.
 
COLOR CYCLE ORDER:
 
1. Multi-colored
2. White
3. Blue
4. Yellow
5. Red
6. Purple
7. Orange
 
 
 

For more information:

1536-1261, USA Responsible Person: Estiwork Consult, Vesivarava tn 50 201 Apt 123 Tallinn Estonia I Heidensche Str. 86, 32791 Large, Germany.